Zanussi Refrigerator ZBA 6160 User Manual

REFRIGERATOR  
ZBA 6160  
ZBA 6230  
INSTRUCTION BOOKLET  
2222748-78  
 
At the end of the Appliance Life  
• When disposing of your appliance use an  
authorised disposal site.  
The symbol  
on the product or on its packaging  
indicates that this product may not be treated as  
household waste. Instead it shall be handed over  
to the applicable collection point for the recycling of  
electrical and electronic equipment. By ensuring  
this product is disposed of correctly, you will help  
prevent potential negative consequences for the  
environment and human health, which could  
otherwise be caused by inappropriate waste  
handling of this product. For more detailed  
information about recycling of this product, please  
contact your local city office, your household waste  
disposal service or the shop where you purchased  
the product.  
• Remove the plug and ensure that any locks or  
catches are removed, to prevent young children  
being trapped inside.  
Contents  
Instructions for the User  
Instructions for the Installer  
Important Safety Instructions . . . . . . . . . . . . . . . .2  
Technical specifications . . . . . . . . . . . . . . . . . . . .10  
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Before use / Setting the temperature . . . . . . . . . . .4  
Fresh food refrigeration . . . . . . . . . . . . . . . . . . . . .4  
The door shelves . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Normal operating sounds . . . . . . . . . . . . . . . . . . . .5  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Door reversal . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Electrical Connection . . . . . . . . . . . . . . . . . . . . . .12  
Building in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Health and safety guidelines . . . . . . . . . . . . . . . . .5  
Defrosting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Maintenance and Cleaning . . . . . . . . . . . . . . . . . .6  
Internal cleaning / Changing the light bulb . . . . . .6  
Something not Working? . . . . . . . . . . . . . . . . . . .7  
Service and Spare Parts . . . . . . . . . . . . . . . . . . . .8  
Customer Care Department . . . . . . . . . . . . . . . . . .8  
Guarantee Conditions . . . . . . . . . . . . . . . . . . . . . . .9  
3
 
Operation  
Before use  
Remove all securing tapes. Wash inside the  
appliance with lukewarm water and bicarbonate of  
soda (5 ml to 0.5 litre of water). Do not use soap or  
detergent as the smell may linger. Dry thoroughly.  
Meat can only be stored safely in this way for one  
or two days at the most.  
Fruit & vegetables: these should be thoroughly  
cleaned and placed in the bottom salad bin.  
Butter & cheese: these should be placed in special  
airtight containers or wrapped in aluminium foil or  
polythene bags to exclude as much air as possible.  
Setting the temperature  
Milk bottles: these should have a cap and should be  
stored in the bottle rack on the door.  
The temperature inside the refrigerator is regulated  
by a thermostat control knob with 6 temperature  
positions and one «OFF» (O) position.  
Position 1 = minimum coldness  
Position 6 = maximum coldness  
Turn the thermostat control knob to the required  
position.  
The walls of the refrigerator are equipped with  
runners so that shelves can be positioned as  
desired.  
For better use of space, the front half-shelves can lie  
over the rear ones (see fig.).  
An intermediate position is usually the most suitable,  
although the temperature will be affected by:  
Room temperature  
• How often the door is opened  
• How much food is stored  
• Position of the appliance  
In determining the correct temperature control setting  
all these factors have to be considered and some  
experimentation may be necessary.  
When altering the temperature setting, allow 24  
hours for the temperature to stablise before making  
further changes.  
D338  
Important  
During prolonged periods of abnormally hot  
weather, if the thermostat is set on too high a  
number, the cooling system may operate  
continuously and the fridge cooling plate may  
not defrost. Turning the knob to a lower  
number will cause the automatic defrosting to  
resume.  
The door shelves  
To permit storage of food packages of various sizes  
the central door shelf can be adjusted in height.  
To do this proceed as figure.  
If you wish to return to a lower temperature,  
turn the thermostat knob to a higher number,  
however you should turn the setting lower  
occasionally to allow automatic defrosting.  
Fresh food refrigeration  
To obtain the best performance, do not store warm  
food or evaporating liquids in the refrigerator; do  
cover or wrap the food, particularly if it has a strong  
flavour.  
Do not cover the shelves with any protective  
material, such as paper, cardboard or plastic, which  
could obstruct the air circulation.  
To help you use your refrigerator correctly, here are  
some more useful hints:  
Raw meat (beef, pork, lamb & chicken or poultry):  
wrap in polythene bags and place on top of the salad  
bin.  
4
 
Normal operating sounds  
You may hear faint gurgling or bubbling sounds when  
the refrigerant is pumped through the coils or tubing  
at the rear, to the cooling plate.  
When the compressor is on, the refrigerant is being  
pumped round, and you will hear a whirring sound or  
pulsating noise from the compressor.  
A thermostat controls the compressor, and you will  
hear a faint ‘click’ when the thermostat cuts in and  
out.  
For more thorough cleaning, the top door shelf and  
the bottle shelf can be removed by pulling them in  
the director of the arrows, then refitting them in  
position.  
Health and Safety Guidelines  
Because of consumer demand, preservatives have been removed from many pre-prepared foods.  
This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and  
storage of food is even more important than ever.  
The following tips should help you to ensure that  
the food in your home is in as perfect condition  
as possible.  
• Never allow spillages to dry and harden.  
• Store eggs in the egg rack provided in the  
refrigerator door. Discard any broken or chipped  
eggs.  
• Keep the time between buying chilled food and  
placing it in your fridge as short as possible. Tests  
showed that the temperature of 1 litre of orange  
juice rose to 22°C in an hour between the  
supermarket and home. It then took 11 hours to get  
down to 7°C in the refrigerator.  
• Regularly check the refrigerator door seal to  
ensure that it is clean and free from debris.  
• Always wash your hands with soapy water and dry  
them with a clean towel before handling food.  
• Keep work surfaces clean and avoid cross  
contamination by not using the same work surface  
or knife, without washing them thoroughly in  
between.  
• Keep the refrigerator door closed as much as  
possible.  
• Do not push food together too much, try to allow air  
to circulate around each item.  
• Cool cooked food as quickly as possible but do  
NOT place in the refrigerator until cool. (Leave food  
in a cool place in order that it can then be placed in  
the refrigerator as soon as possible).  
• Do NOT mix raw and cooked meat, they must be in  
separate containers. Take care not to let the meat  
juices drip onto other food. If the meat does drip,  
remove everything and clean thoroughly.  
• Do not store food uncovered.  
• Remove suspect food from your refrigerator and  
clean the interior (see “Maintenance and  
Cleaning”).  
5
 
Defrosting  
The refrigerator automatically defrosts every time the  
compressor stops. The water is discharged, via the  
pipe, into a tray located at the back of the appliance  
above the compressor, where it evaporates.  
Important  
To avoid defrost water overflowing into the  
fridge, periodically clean the water discharge  
hole in the centre of the V shaped drip collector  
at the back of the refrigerator compartment  
behind the salad bin. Use the special cleaner  
provided which you will find already inserted into  
the discharge hole.  
D037  
Maintenance and Cleaning  
Warning  
Changing the light bulb  
Before any maintenance or cleaning work  
is carried out, DISCONNECT the appliance  
from the ELECTRICITY supply.  
Should the interior light fail to work, first switch off the  
appliance and disconnect from the electricity supply,  
then replace the bulb as follows:  
1. Unscrew the light cover and then pull it outward by  
pressing as shown in the figure.  
Important  
This appliance contains hydrocarbons in  
its cooling unit maintenance and  
recharging must therefore only be carried  
out by authorised technicians.  
Internal cleaning  
Clean the inside and accessories with warm water  
and bicarbonate of soda (5ml to 0.5 litre of water).  
Rinse and dry thoroughly.  
NEVER USE DETERGENTS, ABRASIVE  
POWDERS, HIGHLY PERFUMED CLEANING  
PRODUCTS OR WAX POLISHES, TO CLEAN THE  
INTERIOR AS THESE WILL DAMAGE THE  
SURFACE AND LEAVE A STRONG SMELL.  
D411  
2. Unscrew the bulb and replace it with a new 15  
watt bulb (available from your nearest Service  
Force Centre).  
Important  
Do not use abrasive products.  
3. Replace the light cover by sliding it into its original  
position and replacing the screw.  
Clean the drain hole of the water trough at regular  
intervals and make sure that the drain hole is never  
obstructed, so that the defrost water may flow freely.  
When the appliance is not in use  
Once or twice a year remove the ventilation grill and  
dust the air channels at the base of the appliance  
with a brush or vacuum cleaner.  
When the appliance is not in use for long periods,  
disconnect from the electricity supply, empty all foods  
and clean the appliance, leaving the door ajar to  
prevent unpleasant smells.  
You MUST ensure that the appliance is switched  
OFF. An accumulation of dust will affect the  
performance of the appliance and cause excessive  
electricity consumption.  
6
 
Something not Working?  
Before contacting your local Service Force Centre check the following points.  
IMPORTANT: If you call out an engineer to a fault listed below, or to repair a fault caused by incorrect use or  
installation, a charge will be made even if the appliance is under guarantee.  
Symptom  
Solution  
No power to appliance  
- Check there is power at the socket.  
- Check there is not a power cut by checking the  
household lights.  
- Check the fuse has not blown.  
The light does not come on  
- Ensure that the bulb is correctly fitted.  
- Replace the bulb if it has blown.  
- Check the door light switch is not jammed.  
The temperature in the fridge or freezer section is too - Check the ambient temperature is within the appliances  
high  
operating limits of 10ÞC to 38ÞC.  
- Check the thermostat control knob is turned to the  
correct setting relative to ambient conditions.  
The compressor runs continuosly  
- Adjust the thermostat control knob to give correct  
temperature control. See page 4.  
- Check that the door is closed.  
- Large quantities of food have recently been placed in  
the cabinet and/or door is frequently opened.  
- Check that air ventilation is not obstructed.  
Excessive frost and ice has built up  
- Ensure the door is not left open.  
- Check that nothing is preventing the door from closing.  
- Is the door gasket intact and clean.  
Noise  
- Refer to normal operating sounds.  
Water under the salad bins  
- Check the drain hole is not blocked. (see Maintenance  
and Cleaning).  
If after the above checks, there is still a fault, call your local Service Force Centre.  
In-guarantee customers should ensure that the above checks have been made as the engineer will make a  
charge if the fault is not a mechanical or electrical breakdown.  
Please note that proof of purchase is required for any in-guarantee service calls.  
7
 
Service and Spare Parts  
In the event of your appliance requiring service, or if  
you wish to purchase spare parts, please contact  
your local Service Force Centre by telephoning:-  
For Customer Service in Ireland please contact us at  
the address below:  
Zanussi  
08705 929929  
Electrolux Group (Irl) Ltd  
Long Mile Road  
Dublin 12  
Your telephone call will be automatically routed to the  
Service Force Centre covering your post code area.  
Republic of Ireland  
Tel: + 353 1 4090751  
For the address of your local Service Force Centre  
and further information about Service Force, please  
visit the website at www.serviceforce.co.uk  
Before calling out an engineer, please ensure you  
have read the details under the heading “Something  
Not Working.”  
When you contact the Service Force Centre you will  
need to give the following details:  
1. Your name, address and post code  
2. Your telephone number  
3. Clear and concise details of the fault  
4. The model and serial number of the appliance  
(found on the rating plate)  
5. The purchase date  
Please note that a valid purchase receipt or  
guarantee documentation is required for in-  
guarantee service calls.  
Customer Care Department  
For general enquiries concerning your Zanussi  
appliance or for further information on Zanussi  
products, please contact our Customer Care  
Department by letter or telephone at the address  
below or visit our website at www.zanussi.co.uk  
Customer Care Department  
Major Appliances  
Zanussi  
Addington Way  
Luton  
Bedfordshire  
LU4 9QQ  
Tel: 08705 727 727 ( * )  
* calls to this number may be recorded for training  
purposes.  
8
 
Guarantee Conditions  
Standard guarantee conditions  
We, Zanussi, undertake that if within 12 months of the date of purchase this Zanussi appliance or any part  
thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair  
or replace the same FREE OF CHARGE for labour, materials or carriage on condition that:  
• The appliance has been correctly installed and used only on the electricity supply stated on the rating plate.  
• The appliance has been used for normal domestic purposes only, and in accordance with the manufacturer's  
instructions.  
• The appliance has not been serviced, maintained repaired, taken apart or tampered with by any person not  
authorised by us.  
All service work under this guarantee must be undertaken by a Service Force Centre.  
• Any appliance or defective part replaced shall become the Company's property.  
• This guarantee is in addition to your statutory and other legal rights.  
Home visits are made between 8.30am and 5.30pm Monday to Friday. Visits may be available outside these  
hours in which case a premium will be charged.  
Exclusions  
This guarantee does not cover:  
• Damage or calls resulting from transportation, improper use or neglect, the replacement of any light bulbs or  
removable parts of glass or plastic.  
• Costs incurred for calls to put right an appliance which is improperly installed or calls to appliances outside  
the United Kingdom.  
• Appliances found to be in use within a commercial environment, plus those which are subject to rental  
agreements.  
• Products of Zanussi manufacture which are not marketed by Zanussi.  
European Guarantee  
If you should move to another country within Europe then your guarantee moves with you to your new home  
subject to the following qualifications:  
• The guarantee starts from the date you first purchased your product.  
• The guarantee is for the same period and to the same extent for labour and parts as exists in the new  
country of use for this brand or range of products.  
• This guarantee relates to you and cannot be transferred to another user.  
Your new home is within European Community (EC) or European Free Trade Area.  
• The product is installed and used in accordance with our instructions and is only used domestically, i.e. a  
normal household.  
• The product is installed taking into account regulations in your new country.  
Before you move please contact your nearest Customer Care centre, listed below, to give them details of your  
new home. They will then ensure that the local Service Organisation is aware of your move and able to look  
after you and your appliance.  
France  
Germany  
Italy  
Senlis  
+33 (0) 3 44 62 29 29  
+49 (0) 800 234 7378  
+39 (0) 0434 39 4700  
+46 (0) 8 672 53 90  
+44 (0) 8705 727727  
+353 (0) 1 4090751  
Nürnberg  
Pordenone  
Stockholm  
Luton  
Sweden  
UK  
Ireland  
Dublin  
9
 
Technical specifications  
ZBA 6160  
_ 230-240 V / 50 Hz  
_ 1 A  
ZBA 6230  
_ 230-240 V / 50 Hz  
_ 0,8 A  
POWER SUPPLY VOLTAGE AND FREQUENCY  
TOTAL POWER ABSORBED  
AVERAGE DAILY UNITS ELECTRICITY (*)  
_ 0,41 kW  
_ 0,44 kWh  
GROSS CAPACITY  
NET CAPACITY  
158 l  
154 l  
230 l  
228 l  
(*) This figure is based on standard test results in accordance with European Standard EN153. Actual  
consumption will depend on how the appliance is used and where it is located.  
Installation  
The appliance should be located in  
a
dry  
Warning  
atmosphere, out of direct sunlight and away from  
continuous heat and extreme temperature, e.g. not  
next to a boiler or radiator or in a very cold room e.g.  
an outhouse. If these temperatures are exceeded i.e.  
warmer or colder, then the appliance may not  
operate correctly.  
IF YOU ARE DISCARDING AN OLD  
APPLIANCE THAT HAS A LOCK OR CATCH  
ON THE DOOR, YOU MUST ENSURE THAT  
IT IS MADE UNUSABLE TO PREVENT  
YOUNG CHILDREN BEING TRAPPED  
INSIDE.  
For building-in and door reversal instructions please  
refer to the relevant instructions on the following  
pages.  
Depending upon the position which you choose for  
your appliance, you may wish to reverse the way in  
which the door opens. To do this, refer to instructions  
under “Door reversal”.  
Important  
It must be possible to disconnect the appliance  
from the mains power supply; the plug must  
therefore be easily accessible after installation.  
Positioning  
The appliance should only be installed at a location  
where the ambient temperature corresponds to the  
climate classification indicated on the rating plate,  
which is located on the inside left of the appliance.  
The following table shows which ambient  
temperature is correct for each climate classification.  
SN  
ST  
+10°C to +32°C  
+18°C to +38°C  
10  
 
Door reversal  
The appliance’s door has been locked in position for  
transport by means of pins on both sides. According  
to the door opening direction, remove the relevant  
pins at the top and at the bottom.  
A
Attention  
After completion of the door reversing  
operation, check that the door gasket adheres  
to the cabinet. If the ambient temperature is  
cold (i.e. in Winter), the gasket may not fit  
perfectly to the cabinet. In that case, wait for  
the natural fitting of the gasket or accelerate  
this process by heating up the part involved  
with a normal hairdryer on a low setting.  
B
11  
 
Electrical Connection  
If you fit your own plug, the colours of the wires in the  
mains lead of your appliance, may not correspond  
with the markings identifying the terminals in your  
plug, proceed as follows:  
WARNING  
THIS APPLIANCE MUST BE EARTHED.  
The manufacturer declines any liability  
should this safety measure not be  
observed.  
Connect the Green and the Yellow (earth) wire to the  
terminal in the plug which is marked with the letter  
If the plug that is fitted to your appliance is not  
suitable for your socket outlet, it must be cut off and  
the appropriate plug fitted.  
«E» or the earth symbol  
yellow.  
, or coloured green and  
Connect the blue (neutral) wire to the terminal in the  
plug which is marked with the letter «N» or coloured  
black.  
Remove the fuse from the cut off plug.  
The cut off plug should then be disposed of to  
prevent the hazard of shocks in case it should be  
plugged into a 13amp socket in another part of your  
home.  
Connect the brown (live) wire to the terminal in the  
plug which is marked with the letter «L» or coloured  
red.  
Important  
The plug moulded onto the lead incorporates a fuse.  
For replacement, use a 13amp BS1362 fuse. Only  
ASTA or BSI approved fuses should be used.  
The wires in the mains lead are coloured in  
accordance with the following code:  
Green and Yellow - Earth  
The plug must not be used if the fuse cover/carrier is  
lost. The cover/carrier is indicated by the coloured  
insert at the base of the plug.  
Blue  
- Neutral  
- Live  
Brown  
GREEN & YELLOW  
13 AMP. FUSE  
This appliance complies with the following E.E.C.  
Directive:  
-73/23 EEC of 19.2.73 (Low Voltage  
Directive) and subsequent amendments.  
- 87/308 of 2.6.87 (Radio Interference  
Suppression) and subsequent amendments.  
- 89/336 EEC of 3.5.89 (Electromagnetic  
Compatibility Directive) and subsequent  
amendments.  
BROWN  
BLUE  
CORD CLAMP  
D207  
Please ensure that when the appliance is  
installed it is easily accessible for the engineer in  
the event of breakdown.  
12  
 
Building in  
Dimensions of the recess  
ZI 9155 A  
Height of housing (1) mm 880  
ZI 9225 A  
1225  
1
Depth of housing (2)  
Width of housing (3)  
mm 550  
mm 560  
550  
560  
2
D022  
3
1. Fit the appliance in the niche by making sure that  
it stands against the interior surface of the unit on  
the side where the door hinges of the appliances  
are fitted. Insert the appliance until the upper strip  
butts up against the unit (1) and make sure that  
the lower hinge is in line with the surface of the  
unit (2).  
1
2
PR0  
It is necessary that the cabinet has a ventilation  
recess with the following dimensions:  
Depth  
50 mm  
Width 540 mm  
50 mm  
D132  
2. Press in the joint covers between the appliance  
and the kitchen furniture.  
min.  
200 cm  
2
D526  
For appropriate venting, follow indications in the  
figure.  
I
3. Open the door and push the appliance against the  
side of kitchen furniture opposite to that of the  
appliance hinges. Fasten the appliance with 4  
screws (I) provided in the kit included with the  
appliance.  
13  
 
Ha  
C
D
Hc  
E
B
7. Fix cover (Hc) on guide (Ha) until it clips into  
place.  
4. Snap vent grill (B) and hinge cover (E) into  
position.  
Apply blanking covers (C-D) as indicated.  
8mm  
Hb  
Ha  
Hc  
Ha  
Hb  
PR167  
Hd  
8. Open the appliance door and the furniture door at  
90°. Insert the small square (Hb) into guide (Ha).  
Put together the appliance door and the furniture  
door and mark the holes as indicated in the figure.  
PR266  
5. Separate parts Ha, Hb, Hc, Hd as shown in the  
figure.  
ca. 50 mm  
90°  
8mm  
90°  
K
ca. 50 mm  
Ha  
6. Place guide (Ha) on the inside part of the furniture  
door, up and down as shown in the figure and  
mark the position of external holes. After having  
drilled holes, fix the guide with the screws  
supplied.  
PR167  
9. Remove the squares and mark a distance of  
8 mm from the outer edge of the door where the  
nail must be fitted (K).  
14  
 
Hb  
PR168  
10. Place the small square on the guide again and fix  
it with the screws supplied.  
Should the alignment of the furniture door be  
necessary, use the clearance of slots.  
At the end of this procedure, it is necessary to  
check if the door of the furniture closes properly.  
Hb  
Hd  
PR167/1  
11. Fix cover (Hd) on the small square (Hb) until it  
clips into place.  
15  
 
© Electrolux plc 2007  
 

Weider Home Gym 831156071 User Manual
West Bend Oven L5659B User Manual
Whirlpool Convection Oven RBD275PRS01 User Manual
Whirlpool Cooktop 98 User Manual
Wolf Ventilation Hood PL582212 User Manual
Xtatix MP3 Player Pocket Candy Zent User Manual
Zanussi Dishwasher 534314 User Manual
Zanussi Oven 291538 User Manual
Zanussi Range ZKL 850 LX User Manual
Znyx Networks Network Card ZX340Q User Manual